|
|
DESCRIPTION:
A one coat, heavy duty waterproofer used to waterproof plastered,
pre-cast and face brick walls. Bricks, pavers etc.
It can be used on masonry, bricks, stucco, precast concrete,
sandstone, limestone, precast stone, ceramics, aged concrete
and most natural stone.
Water Shield will not change the look of your substrate. |
|
APPLICATION:
All surfaces to be cleaned and dust free. Do not apply Water Shield
to surfaces previously treated with other water repellents.
Water Shield can be applied to damp surfaces and can be applied
by brush, roller or spray.
To achieve maximum water repellence, allow the treated surface to
dry for at least 24 hours.
The treated surface may be painted after 2 days.
If overspray occurs, glass or aluminium surfaces should be immediately
wiped clean with a wet cloth before product dries.
SAFETY
PRECAUTIONS & FIRST AID
Wash hands after use. Wear protective clothing, goggles and gloves.
Use in well ventilated area. When spraying use respirator mask.
Do not use on surfaces intended for food, potable water, livestock
or dairy animals.
Eye Contact: Gently flush eyes immediately with plenty of water
for 15 minutes while holding eyelids apart. Seek medical attention
immediately.
Skin Contact: Immediately wash with plenty of soap and water.
Remove any contaminated clothing.
Seek medical attention if irritation persists.
Ingestion: Do Not Induce Vomiting! Seek medical attention immediately
|
|
| |
|
|
