DESCRIPTION:
Liquid bonding adhesive for Plaster, Gypsum and Screeds.

USAGE & APPLICATION:

Horizontal Surfaces (floors etc.) :
Make sure the surface is free from dust and loose concrete etc.
Apply first coat of Plasters Mate to entire surface and allow to dry.
Once ready to screed, apply a second coat of Plasters Mate to surface and then apply screed onto the wet Plasters Mate.

Vertical Surfaces (columns ceilings etc.):
Option 1:
Apply one coat of Plasters Mate to surface and allow to dry.
Apply a second coat of Plasters Mate and while compound is still wet, plaster in the usual manner.

Option 2:
Dampen surface lightly that is to be plastered.
Mix 1 part Plasters Mate with 1 part cement and one part sand to make a slurry mix.
Apply slurry onto surface with a block brush and allow to dry.
Then plaster in the normal manner.

If using Gypsum base plastering, apply Plasters Mate to surface and while compound is still wet, plaster and complete in one application.

Plasters Mate can be applied by brush or roller.

Clean tools immediately after use with water.